Tired of lugging laundry down the basement stairs? Maybe you should consider installing a laundry chute. Kits are available at home centers, or you can build the chute yourself.
Listen to ON INSTALLING A LAUNDRY CHUTE or read the text below:
To construct the chase-the passage through which you drop clothes to the basement-you have several options for materials: a galvanized heating duct, wood, drywall or melamine. Chutes work best when the chase is larger, say 1 by 2 feet. And make sure any joints are smooth, so clothing articles like socks do not snag on the way down.
Location is key. You'll need to find a stud bay with unobstructed access to the basement-that is, no electrical wiring, no plumbing. Hallways are often a good bet, especially if their walls run parallel to underlying floor joists.
Use a stud finder to locate two adjacent studs, then cut a small hole in the wall to check for obstructions. If the bay is clear, use a reciprocating saw to cut an opening for the bottom of the chute, downstairs. Once you've double-checked that there are no obstructions upstairs, create the hole for the top of the chute.
Upstairs you'll also need to remove the base plate between the two studs and cut a hole through the plywood flooring to make room for the chute. Assemble the chute, fit it into the bay, then finish up by trimming out the upstairs end of the chute and installing a door.
Before you start the job, be sure to check local building codes.
Radio is a newly launched daily radio spot carried on more than 60 stations around the country (and growing). You can get your daily dose here, by listening to-or reading-Bob's 60-second home improvement radio tip of the day.