Roofing & Siding

Radio: Replacing Shingles the DIY Way


If you've got a broken shingle or two on your roof, it's easy to repair the problem yourself. Most home centers sell shingles in small batches. Just take a broken shingle with you so you can pick a close match.

Listen to ON REPLACING SHINGLES or read the text below:

Once safely on the roof, gently nudge a pry bar, its full length, under the three tabs in the row of shingles just above the damaged shingle. Then use the claw on the pry bar to remove the nails you see under the tabs.

Do the same for the next row of shingles, the one that's just above. Once you remove those two rows of nails, you'll be able pull out the damaged shingle. Next, slide the new shingle into place and fasten it with six roofing nails, one under each of the tabs you loosened.

To finish off, squeeze a dab or two of roofing cement under the tabs of the new shingle, plus under all the tabs you loosened at the start. Apply a little pressure to ensure the tabs make solid contact with the cement.

Radio is a newly launched daily radio spot carried on more than 60 stations around the country (and growing). You can get your daily dose here, by listening to-or reading-Bob's 60-second home improvement radio tip of the day.